Single Set Torque Screwdriver

TSD-03 contains a Universal Handle (red for Torx and blue for Torx Plus) w/ torque adapter, two (2) pcs of 25mm Torx or Torx Plus bits, and two (2) pcs of 50mm Torx or Torx Plus bits. The sizes are from TX6 to TX15 for Torx and 6IP to 15IP for Torx Plus. The corresponding torques are from 0.6 to 3.0 Nm, which equal to 5.3 to 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle w/ torque adapter is measured 2 3/4" X 3/4" X 2 5/8" (L X W X H). The torque adapter which has the industrial standard preset torque is magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Standard Set Torque Screwdriver

TSD-06 contains a Slim-Fit Handle (red for Torx and blue for Torx Plus) with torque adapter, a 25mm Torx or Torx Plus bit, and a 50mm Torx or Torx Plus bit. The sizes are from TX6 to TX15 for Torx and 6IP to 15IP for Torx Plus. The corresponding torques are from 0.6 to 3.0 Nm, which equal to 5.3 to 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The Soft grip Slim-Fit Handle with torque adapter is 5 1/8" in height and 1 1/4" in diameter. The torque adapter which has the industrial standard preset torque is magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

BT Set Torque Screwdriver

TSD-11 contains a T-Flying handle (red for Torx and blue for Torx Plus) w/ torque adapter, and four (4) pcs of 50mm Torx or Torx Plus bits. The sizes are from TX10 to TX25 for Torx and 10IP to 25IP for Torx Plus. The corresponding torques are from 2.0 to 5.5 Nm17.7 to 48.7 In-lb, which equal to 17.7 to 48.7 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-Flying handle w/ torque adapter is measured 3 7/8" X 1" X 2 1/2" (L X W X H). The torque adapter which has the industrial standard preset torque is magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Smart Kit Torque Screwdriver

TSD-01 contains a Universal Handle (red for Torx and blue for Torx Plus), six (6) pcs of torque adapters, and six (6) pcs of 25mm Torx or Torx Plus bits. The sizes are TX6, TX7, TX8, TX9, TX10, and TX15 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP, and 15IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, and 3.0 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H). The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Togo Kit Torque Screwdriver

TSD-10 contains a Universal and a Slim-Flit handles (red for Torx and blue for Torx Plus), six (6) pcs of torque adapters, six (6) pcs of 25mm Torx or Torx Plus bits, and six (6) pcs of 50mm Torx or Torx Plus bits. The sizes are TX6, TX7, TX8, TX9, TX10, and TX15 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP, and 15IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, and 3.0 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H) and the small soft grip HD handle is 4" in length and 1 1/4" in diameter. The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Pro Station Torque Screwdriver

TSD-26 contains a Universal, Slim-Flit and T flying handles, 8pcs of torque adapters, 22pcs of 50mm Torx/Torx Plus bits/Hex. The sizes are TX6, TX7, TX8, TX9, TX10, TX15, TX20 and TX25 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP,15IP, 20IP and 25IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, 3.0, 5.0 and 5.5Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H) and the small soft grip HD handle is 4" in length and 1 1/4" in diameter. The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Work Station Torque Screwdriver

TSD-04 contains six (6) pcs of size-marked Universal Handles (red for Torx and blue for Torx Plus) w/ torque adapters, six (6) pcs of 25mm Torx or Torx Plus bits, and six (6) pcs of 50mm Torx or Torx Plus bits in a size-marked steel stand. The sizes are TX6, TX7, TX8, TX9, TX10, and TX15 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP, and 15IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, and 3.0 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle w/ torque adapter is 2 3/4" X 3/4" X 2 5/8" (L X W X H). The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Master Kit Torque Screwdriver

TSD-17 contains a Universal, Slim-Flit and T flying handles, 7pcs of torque adapters, 20pcs of 50mm Torx/Torx Plus bits/Hex. The sizes are TX6, TX7, TX8, TX9, TX10, TX15, TX20 and TX25 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP,15IP, 20IP and 25IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, 3.0, 5.0 and 5.5Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H) and the small soft grip HD handle is 4" in length and 1 1/4" in diameter. The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

7 in 1 Multi Torque Adapter Kit

The 7-in-1 multi-torque adapter covers torque ranges of 2, 3, 4, 5, 6, 8, and 10Nm. This kit is your go-to tool for a wide range of applications.

Dual Kit Torque Screwdriver

TSD-8 contains a Slim-Fit Handle, six (6) pcs of torque adapters, six (6) pcs of 25mm Torx and six (6) pcs of 25mm Torx Plus bits. The sizes are TX6, TX7, TX8, TX9, TX10, and TX15 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP, and 15IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, and 3.0 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H) and the small soft grip HD handle is 4" in length and 1 1/4" in diameter. The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Smart Kit II Torque Screwdriver

TSD-05 contains a Universal Handle (red for Torx and blue for Torx Plus), six (6) pcs of torque adapters, and six (6) pcs of 25mm Torx or Torx Plus bits. The sizes are TX6, TX7, TX8, TX9, TX10, and TX15 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP, and 15IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, and 3.0 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H). The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Expert Kit Torque Screwdriver

TSD-02 contains six (6) pcs of Universal Handle (red for Torx and blue for Torx Plus), six (6) pcs of torque adapters, and six (6) pcs of 25mm Torx or Torx Plus bits. The sizes are TX6, TX7, TX8, TX9, TX10, and TX15 for Torx, and 6IP, 7IP, 8IP, 9IP, 10IP, and 15IP for Torx Plus. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, and 3.0 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, and 26.6 In-lb. (Torques are the same for both Torx and Torx Plus systems) The T-type Universal Handle is 2 3/4" X 3/4" X 1 1/2" (L X W X H). The torque adapters which have the industrial standard preset torque are magnetized and color coded. The high alloy steel bits are also magnetized and color coded with the hardness of 58-60 HRC.

Sloky Torque Adapter:

Material: Carbon Steel Hardness: HRC 43° ~ 48° Surface Treatment: Electroless Nickel Unit conversion: 1 Nm = 10.20kgf-cmThree (3) pcs of torque adapters of the same size are packaged in a plastc case. The available sizes are TX6/6IP, TX7/7IP, TX8/8IP, TX9/9IP, TX10/10IP, TX15/15IP, TX20/20IP, and TX25/25IP, The torque adapters are good for both Torx and Torx Plus systems. The corresponding torques are 0.6, 0.9, 1.2, 1.4, 2.0, 3.0, 5.0, and 5.5 Nm, which equal to 5.3, 8.0, 10.6, 12.4, 17.7, 26.6, 44.3, and 48.7 In-lb. These settings are the same across all the carbide manufacturers worldwide. The torque adapter has an universal 1/4" hex shank in one end to connect to the handle and a 1/4" hex slot in the other end to connect to the bit. It is 1 1/2" in length and 1/2" in diameter with life cycle is 20,000 operations and the accuracy tolerance is +-10%. All the torque adapters are magnetized and color coded. (Patent no. US 8549963/DE 10212005885.3/JP 3174153/TW M439546/CN ZL201220320077.3)

C4 Mini torque adapter

Material: Carbon Steel Hardness: HRC 43° ~ 48° Surface Treatment: Electroless Nickel Unit conversion: 1 Nm = 10.20kgf-cm

Expend Adapter_tsd12

Material: Carbon Steel Hardness: HRC 43° ~ 48° Surface Treatment: Electroless Nickel Unit conversion: 1 Nm = 10.20kgf-cm

Adjustable Torque Adapter

Material: Carbon Steel Hardness: HRC 43° ~ 48° Surface Treatment: Electroless Nickel Unit conversion: 1 Nm = 10.20kgf-cm

Custom and New Application

Material: Carbon Steel Hardness: HRC 43° ~ 48° Surface Treatment: Electroless Nickel Unit conversion: 1 Nm = 10.20kgf-cm

Universal Handle

Good for all torques; recommanded to apply with 0.6~3Nm like T6~T15 and 6IP~15IP All the handles have a 1/4" hex slot to connect to the torque adapter. Compact T-type Universal Handle comes with a fast turning shaft on the top, the dimension is 2 3/4" X 3/4" X 2 5/8" (L X W X H).

Slim-Fit Handle

Good for smaller torques; recommanded to apply <2Nm like T6~T8 and 6IP~8IP All the handles have a 1/4" hex slot to connect to the torque adapter. HD handle: The straight soft grip handle comes with two (2) sizes, the small size is 3 3/4" in length and 1" in diameter, and the large size is 4 1/2" in length and 1 1/2" in diameter.

T-Flying Handle

Good for bigger torques; recommanded to apply >2Nm like T10~T25 and 10IP~25IP All the handles have a 1/4" hex slot to connect to the torque adapter. Heavy duty T-Flying handle is designed to use in the large torque operations, the dimension is 3 7/8" X 1" X 2 1/2" (L X W X H).

TORX® 25mm TX Bits

Simple operation; No Mistake! The color identification is visible on both adapters and bits. Exchange bits system with colour coding All adapters with magnetic, the bits can be inserted and automatically locked into the adapters.

TORX® 50mm TX Bits

Simple operation; No Mistake! The color identification is visible on both adapters and bits. Exchange bits system with colour coding All adapters with magnetic, the bits can be inserted and automatically locked into the adapters.

TORX® 75mm TX Bits

Simple operation; No Mistake! The color identification is visible on both adapters and bits. Exchange bits system with colour coding All adapters with magnetic, the bits can be inserted and automatically locked into the adapters.

TORX PLUS® 25mm IP Bits

Simple operation; No Mistake! The color identification is visible on both adapters and bits. Exchange bits system with colour coding All adapters with magnetic, the bits can be inserted and automatically locked into the adapters.